Industrial spaces deserve to have great decorative qualities as well. Thus, with this in mind, at MyRevest we created MyPoxcrete, a line of water-based microcement that allows surfaces with extraordinary hardness to be obtained, capable of withstanding abrasion and pedestrian and high vehicle traffic, while maintaining their original appearance for a long periods of time.
This high-performance coating has great workability that allows exceptional finishes to be achieved and also provides great waterproofing to the floors and walls of indoor galleries, garages, industrial warehouses, shops, waiting rooms, corridors and offices, among others.
It's available in 16 colors and 4 different granulometries that stand out for their very natural mineral finish.
MyPoxcrete XL is the ideal epoxy microcement for creating continuous indoor floors and pavements, thanks to its robust technical and aesthetic nature. It can also be used on interior walls, when certain finishes are sought.
Regardless of the chosen surface, a coat of MyPoxcrete M or MyPoxcrete S must be applied afterwards to finish decorating the support.
Inside its packaging, we can find MyPoxcrete Microcement and MyPoxcrete Component B.
pH
9,5 ± 1
Density
(A) 1.65 ± 0.02 g/mL
(B) 1.16 g/mL at 25ºC
Curing
7 - 14 days
Greater hardness and waterproofing
1,40 Kg/m²
It comes in sets of containers:
- 18 Kg + 1.15 Kg
- 4.5 Kg + 0.3 Kg
MyPoxcrete L is the preparation epoxy microcement product with great applicative versatility. It was designed for coating interior walls, but thanks to its hardness, it is also used as a base for indoor floors.
Thus, regardless if it's employed on horizontal or vertical surfaces, after application, it is necessary to manually apply a coat of MyPoxcreteS or MyPoxcrete M to complete the decorative system.
Inside its packaging, we can find MyPoxcrete Microcement and MyPoxcrete Component B.
pH
9.5 ± 1
Density
(A) 1.65 ± 0.02 g/mL
(B) 1.16 g/mL at 25ºC
Curing
7 - 14 days
Greater hardness and waterproofing
1,20 Kg/m²
It comes in sets of containers:
- 18 Kg + 1.15 Kg
- 4.5 Kg + 0.3 Kg
MyPoxcrete M is the finishing epoxy microcement product recommended for use on interior floors. However, due to the finishes it assures with its grain size, it is also used vertically, being applied to interior walls.
As an artisanal coating, before applying this product, two coats of MyPoxcrete XL or MyPoxcrete L must be applied with a trowel (choose one or the other according to each professional's preferences).
The package sets consist of MyPoxcrete Microcemento and MyPoxcrete Component B.
pH
9,5 ± 1
Density
(A) 1.65 ± 0.02 g/mL
(B) 1.16 g/mL at 25ºC
Curing
7 - 14 days
Greater hardness and impermeability
0,70 Kg/m²
Packaged in sets:
- 18 Kg + 1.15 Kg
- 4.5 Kg + 0.3 Kg
MyPoxcrete S is the ideal epoxy microcement finish for coating interior walls, transforming these areas into authentic displays of special finishes.
Its application is very simple and being a finish coating, prior to its use, apply with trowel two coats of MyPoxcrete L or MyPoxcrete XL, depending on the desired effects.
Despite the fineness of its grain, this coating has excellent resistances that make it a great option to apply on floors. In its package, we find MyProxcrete microcement and MyPoxcrete Component B.
pHn
9,5 ± 1
Curing
7 - 14 days
Density
(A) 1.65 ± 0.02 g/mL
(B) 1.16 g/mL at 25ºC
Greater hardness and impermeability
0,55 Kg/m²
Packaged in sets:
- 18 Kg + 1.15 Kg
- 4.5 Kg + 0.3 Kg
Applying MyPoxcrete to floors and walls has a lot of benefits. Much of this is due to its composition, which means that its characteristics become advantages as this coating is applied to the corresponding surface.
MyPoxcrete has been created to create areas covered that maintain in great conditions for the longest possible time. Thanks in part to its high mechanical resistance, with which it is able to resist any threat without cracks or fissures appearing.
One of its most noticeable and unique features. The technique of fresh on fresh will allow us to obtain results with a different decorative effect. A third layer of microcement should be applied when the second stops having "tack".
The superpower of the epoxy resin found in its composition means that neither traffic, nor large pressures, nor excessive wear and tear affects the applied surface. We are talking about a microcement with a good shore hardness of 80-87.
Thanks to its greater impermeability, this coating is ideal for surfaces that are submerged or that are exposed to constant contact with running water.
Inspired by natural formations and the sheen they possess, the finishes of this coating have great beauty in addition to resistance.
Achieving desired finishes is very easy with this range of epoxy coatings thanks to their great workability.
This increases its adaptability compared to other coatings, as it can be applied on any surface, regardless of the material that consists of the original support.
Almost 20 colors and 4 granulometries are more than enough to decorate a space with floors and walls totally to the taste of each person.
Initially, it must be considered that the only MyPoxcrete component to be pigmented is A. From here, depending on the color chosen, the proportions to make the mixes will have to be considered.
One of the keys to this process is that? component A can be pigmented beforehand and left standing until the microcement application is carried out. This is good for distributors because they can sell the product already pigmented. Keep in mind, if pigment remains in the container, this can be collected using a little water.
MyPoxcrete is an epoxy microcement available in 4 granulometries capable of creating very special sensations both on floors and interior walls. To achieve this, the best results, simply carry-out a traditional application process that goes from the preparation of the components mix and the support, to the application of the sealing varnish.
1Preparation.
The base to be applied must be dry, clean, and free from dust, grease, dirt, previous paint or varnish. Whether it is a floor or walls, it can be sanded or cleaned.
2Primer
We recommend using a quality primer like the ones we have in the MyRevest catalog to enhance the adhesion of the microcement. This is essential for a successful application.
3Pigment.
Pour the desired color tonic into component A. This step is key to be performed before mixing with component B.
4Mix of components A and B
Once components A and B have been colored, they must be mixed. *You can find the appropriate proportions in the product datasheet.
5 Apply 2 layers of epoxy microcement preparation
Depending on the desired finish, we apply two coats of MyPoxcrete XL or MyPoxcrete L. It is important to ensure that these layers do not exceed one millimeter in thickness. At the end of each layer's application, sand with 220 grain.
*Drying times will depend on the ambient temperature (you can find estimates in the technical sheet)
6 Apply 1 layer of finish
Apply a coat of the finishing microcements MyPoxcrete M or MyPoxcrete S on the surface, depending on the desired finish. Later, once dry, you need to sand with 400 grain sandpaper.
*Drying times in technical sheet
7Sealing
Seal with one of our MyCover varnishes. We recommend the application of 2 coats of the MySealant 2K varnish, respecting a drying time between coats of 8-24 hours.
The amount of colors that MyPoxcrete is available in can broaden your aesthetic possibilities if we consider the finishes and effects that can be achieved with this epoxy microcement.
The combinations can be endless thanks to its being a very manageable material and that it is worked manually, allowing any applicator to bring out all their artistic skills to create surfaces full of personality and individual style.
It is not recommended to use the epoxy microcement MyPoxcrete in areas that are exposed to the weather since, due to the resins found in its composition, it may turn yellow when in contact with UV rays.
No. This coating is designed so that mesh is not required in its application process as it is applied in very thin layers and, if it were applied, there would be a risk of increasing the thickness of each layer and these could end up cracking.
Yes, any type of primer can be applied depending on the type of surface, although since MyPoxcrete is an epoxy microcement to guarantee the best results we recommend using the MyPoxy primer.
When we speak of an epoxy microcement, we are talking about a material that naturally has a series of resistances much superior to those of other systems, but of course, by sealing it, its durability will be increased to unsuspected limits.
Initially, the color collection of MyPoxcrete epoxy microcement has 16 references, although thanks to our pigments, other ad hoc colors can be created to suit users.
Of course, as long as the floors and walls are part of spaces located indoors. Of course, it should also be said that, being a product with such great resistance, its most common use is on floors due to its great resistance to traffic and other threats.
Due to all the attributes that MyPoxcrete possesses, starting with its great resistances, it is a coating created to be applied in interior areas that are exposed to high traffic. Thus, it is designed to offer great performance in offices, parking lots, shopping centers, or warehouses, among others.
Yes. As we mentioned before, this coating not only has great technical properties, but also has a lot to offer at a decorative level. It is possible to achieve the water effect in any application.
To apply this epoxy microcement on tiles, the first thing to do is to cover the joints that exist on the surface to create a support without irregularities that make the application difficult and affect the final result.
Then, it is necessary to apply our MyPrimer 200 primer for non-absorbent surfaces.
This coating already has an ideal texture for its direct application without needing to add water. But in any case and, although not recommended, if you choose to add, water should only be added to component A prior to mixing with B.