With an acrylic base and low VOCs, MyJointer is our specialist joint filler for tiles and mosaics. Easy to apply, it maintains flexibility even after drying and offers excellent resistance to water and ambient humidity.
Versatile and multi-surface, it adheres perfectly to tiles, mosaics, ceramics, plaster, plasterboard, concrete, brick, stone, mortars and even painted surfaces. It’s the perfect joint filler before applying our ready-to-use microcement MyReadyGo!.
Available in 1.5 kg and 3 kg containers.
Composition
Acrylic filler
VOC: 2004
<\1 g/L
Application thickness
<\4 mm
Drying time
8-10 horas
1
Check and clean the substrate. Make sure it’s stable before application.
2
Stir MyJointer with a spatula and apply it using the spatula or a trowel. Do not exceed 4 mm thickness per coat.
3
Drying is complete in 8–10 hours (touch dry in 5–6 hours). If you plan to apply MyReadyGo! microcement afterwards, allow 12–24 hours.