MyRust is the water-based rust activator that reacts when it comes into contact with metal particles. It is indicated to accelerate the oxidation process of MyMetal and MyOxid products.
It is a special product indicated to enhance the decorative value of metalized finishes and with a rust effect. Wall coatings will have an even more differentiated and personal touch.
With the rust activator, the decorative options of metallic coatings are multiplied. Any finish is good to give an exclusive and natural touch to the space. A product at the service of elegance.
Applicable indoors and outdoors
Applied with a spray
Applicable to MyMetal and MyOxid
MyRust allows for an oxidized finish to be achieved by applying it on top of the metallic coating of MyMetal. Before its application, the surface should be sanded.
The activator is applied with a sprayer which allows the surface to be entirely or partially soaked, depending on the desired finish. The product should be left to act for 8 hours. Subsequently, the areas where one wishes to restore the metallic brightness should be sanded using a 2000 grit sandpaper.
After the application of MyRust, it is necessary to apply two layers of MyCover. The drying time between coats is 4 hours.
The second coat requires a drying period of 12 hours followed by sanding with a 400 grit sandpaper. The sealing process is completed with two coats of MySealant 2K varnish. Leave to dry for 24 hours between both coats.
Once MyOxid has been applied and left to dry for 24 hours, the product
should be thoroughly degreased and sanded.
With the surface prepared, the oxidizing agent
is sprayed on to achieve precision and quality in the
finish.
The product can also be applied with a roller to achieve a smooth finish. Rusty, irregular finishes can also be achieved with a sponge or spray.
In this case, MyRust also needs 8
hours to act.
Next, the sealing process
begins to complete the application
of the metallic coating.