Illustration with a professional applying the adherence promoter for absorbent surfaces
Illustration with a professional applying the adherence promoter for absorbent surfaces

ABSORBENT SURFACES MICROCEMENT PRIMER MYPRIMER 100

Decorative coating on the floor of a restaurant decorated in light tones and designed with high ceilings

MyPrimer 100 is the suitable primer for absorbent surfaces, such as plaster or drywall. It is highly effective due to its penetration depth and it comes ready to use.

It is a water-based acrylic dispersion and it only requires one layer to be applied with a brush or microfiber roller.

It is a fast drying adhesion promoter with which you will have the surface ready for the application of microcement in just 30 minutes.

It is a product manufactured to penetrate perfectly into the absorbent support and has a white color that when dried is colorless.

Technical Characteristics

Secado al Tacto

Touch dry time
30 minutes

pH

pH
8–9

Viscosidad

Viscosity
10–11 s (Ford cup 4)

Sólidos

Solids
10.7%

Yield

MyPrimer 100

0,10 L/m2

White jug of MyPrimer 100 primer

Application of MyPrimer 100

1

Choice of the appropriate roller

SURFACE PREPARATION

Before the application of the primer, the support has to be dry and free of grease, oil and dust.

2

Choice of the appropriate roller

SURFACE DRYING

It is necessary that between 30 minutes and 24 hours have passed to apply the first layer of microcement.

3

Choice of the appropriate roller

APPLICATION OF MYPRIMER 100

It is advisable to apply MyPrimer 100 in a well-ventilated area at a temperature between 5 and 30ºC. The use of rubber gloves and protective goggles is also recommended due to potential splashes.

It is a primer that is free of polluting elements such as solvents or plasticizers.

4

Choice of the appropriate roller

CARE FOR THE PRODUCT AFTER USE

In order to get the most out of the product, you have to close the lid after each use.
It's a good way to prevent the primer from drying out.