The ready-to-use microcement is a mineral mortar manufactured to be applied both on floors and walls. It is a paste that allows to cover pavements and non-passable surfaces in no time. It is the product that improves productivity and reduces application time, as it is not necessary to place mesh or pre-seal layers.
The ready-to-use microcement MyReady Go! allows to achieve very aesthetic finishes with a modern effect on indoor and outdoor surfaces. It is a material suitable for any type of support: tile, tiles, plaster, cement, plasterboard or marble.
It is characterized by its high adhesion, durability and wear resistance, making it an ideal product to cover bathrooms and kitchens. It is a flexible paste, which prevents it from cracking over time, and its high mechanical resistance protects it from abrasion.
MyReady Go! 01 is the ready-to-use microcement designed to achieve a fine finish with a smoother texture. The applicator has the chance to create a touch silky coating with a water effect similar to traditional microcement.
It is used as a finishing layer for the wall system and has a maximum granulometry of 0.1 mm. It is applied in one coat after two layers of MyReady Go! 03.
It conveys design, exclusivity and continuity in any refurbishment or renovation project. With this granulometry, the wall decoration will exude warmth, exquisiteness, and modernity in equal parts.
Maximum thickness per layer
0.3 mm
Shore D hardness
45 mg
Density
1.63 g/m3
Taber Abrasion
42 mg
MyReady Go! 02 is the ready to use microcement designed for the professional applicator who wants to save time and offer exquisite high decoration finishes. It is the material designed to optimize work time for sealing and is used as a finishing layer in the floor system.
It is recommended for use in both indoor and outdoor flooring and has a maximum granulometry of 0.2 mm. It gives the surface a very aesthetic finish, with hardness and resistant to abrasion.
Its application translates into a more natural texture where the mineral is visible. It is a product that leaves less water effect and a more stone-like and uniform finish.
Maximum thickness per layer
0.5 mm
Shore D Hardness
66 mg
Density
1.61 g/m3
Taber Abrasion
66 mg
MyReady Go! 03 is the ready-to-use microcement designed to achieve a modern effect on vertical surfaces and create a coating that contributes to designing a more Scandinavian atmosphere. A material with a huge potential that makes the applicator's life easier.
This is used as a preparation layer for walls and has a granulometry of 0.3 mm. A paste that has more aggregate and with which you can achieve more rustic finishes. A layer of MyReady Go! 01 is applied over this product.
It delivers design, exclusivity, and continuity to any renovation or update project. With this granularity, the wall decoration will radiate warmth, exquisite taste, and modernity in equal parts.
Maximum thickness per layer
0.8 mm
Shore D Hardness
45 mg
Density
1.65 g/m3
Taber Abrasion
42 mg
MyReady Go! 04 is the ready-to-use microcement targeted at professionals who seek aesthetic finishes and quick application.
Unlike other microcements, MyReady Go! 04 need not mix different components as it is already prepared with everything required for a quick and simpler application than with other coatings. You just have to add the pigment for the desired color and stir.
It is used as a preparation layer to apply on floors and has a maximum granularity of 0.5 mm. Over this product, MyReady Go! 02 is applied to finish the floor application.
This product does not leave water marks, nor can the unwanted scorch effects that metal trowels can leave be noticed.
Maximum thickness per layer
1.00 mm
Shore D Hardness
66 mg
Density
1.67 g/m3
Taber Abrasion
66 mg
It is the filling that makes the professional applicator's life easier, as you only need to add the pigment to
start coating.
It is a mixture of resins with quartz that allows achieving
high value decorative finishes.
It is the material that saves working time in
preparation and drying. Its quick application is an added
value when carrying out renovation or
space renovation projects.
It is a material that does not need water or resin for its
preparation. It is enough to add the desired pigment and
stir. It is a product in which it is also not necessary to apply
several layers of sealer, which translates into faster and more efficient construction time.
High-quality pigments become the best ally
to achieve the same color effect on the floor or on the wall.
Designed to achieve finishes with a personal seal in each
project.
Its high mechanical resistance, due to its additives, make it an ideal material for application on large surfaces. A quick and easy application, but it requires the base to be regularized, whether it's an absorbent or non-absorbent surface. It's the stucco that allows the applicator to leave their mark on the coatings. It's a product designed for the professional looking for different effects and textures.
The ready-to-use microcement can be applied both on indoor and outdoor surfaces. It is easy to apply becoming smoother and therefore, less sanding between layers is required. This feature implies a lesser dust production while sanding, since the need for sanding is less.
When the applicator purchases ready-to-use microcement, they
get a maximum performance product. You can use the
amount of product needed without fear of waste.
With the ready-to-use option, a small amount
of product can be stored in a closed container without spoiling.
The material will not harden and can be used later.
