MySealant Go! is a one-component water-based polyurethane varnish. Specially designed for sealing ready-to-use microcements in indoor spaces.
It provides excellent resistance to water as well as to household cleaning agents. It remains unaffected by ultraviolet light and features fast drying.
A one-component, water-based polyurethane varnish that is very easy to apply and significantly enhances the color of coatings created with our ready-to-use microcement MyReadyGo! Available in matte and satin finishes.
Density
1,03±0,01 g/cm3
Taber Abrasion
82 mg
Persoz Hardness
113
Drying Time Between Coats
4-6h
Wait until the last layer of MyReadyGo! microcement is completely dry. Depending on the climate and ventilation conditions of the space, this period may vary between 24 and 48 hours.
Stir MySealant Go! and apply 3 coats with a brush or short-pile velour or microfiber roller over the microcement. Allow 4–6 hours between each coat. Sand the 1st and 2nd coats with 400-grit sandpaper.
Wait 7 days before putting the surface into use. This is the time needed for the water-based varnish to fully cure.
- To avoid marks or grooves caused by soap or detergent, we must rinse immediately when these come into contact with MySealant Go!
- It is easily cleaned with neutral pH soap and water.
- For a more intensive cleaning on floors, bathrooms, or home kitchens, use MyCleaner. However, to remove the dirt that we find most potent in the professional field, use our cleaner MyCleaner Plus.