MyPrimer 200 is a water-based acrylic primer that facilitates the adhesion of microcement on non-absorbent surfaces.
It is the recommended product for surfaces such as marble, terrazzo or tile. It consolidates the substrate and regularizes absorption allowing a good performance of the finishes.
Improves sealant adhesion on non-absorbing substrates and is ready to use. Its application is done by brush or roller.
Dry to Touch
Between 30 and 60 minutes depending on environmental conditions
pH
between 8 and 9
Viscosity
12-13 s (Ford Cup 4)
1
MyPrimer 200 is a high-quality ready-to-use product that can only be applied on a support that must be stable, clean, dry, dust-free, grease-free and without loose parts.
2
For an effective application of this adhesion promoter, the support must be free from remains of self-leveling and chemical products.
3
The surface should be dimensionally stable enough. For proper preparation of the subfloor, it should be allowed to dry between 30 minutes and 24 hours before applying the first layer of microcement.
4
At low temperatures and high humidity, the primer drying process may take longer. It is advisable to apply the primer at an ambient temperature between 10 and 30ºC.