MyPrimer 200 is a water-based acrylic primer that facilitates the bonding of microcement on non-absorbent surfaces.
It is the indicated product for surfaces like marble, terrazzo, or tile. It consolidates the support and regularizes the absorption allowing a good performance of the finishes.
Improves the adhesion of the sealant on non-absorbent substrates and it's ready to use. Its application is done by brush or roller.
Tack Free Drying
Between 30 and 60 minutes depending on environmental conditions
pH
between 8 and 9
Viscosity
12-13 s (Ford Cup 4)
1
MyPrimer 200 is a high-quality ready-to-use product that can only be applied over a support that must be stable, clean, dry, dust-free, grease-free and without loose parts.
2
To achieve an effective application of this adhesion promotor, the support must be free of self-leveling residues and chemical products.
3
The surface should be sufficiently dimensionally stable. For correct preparation of the substrate, you need to wait between 30 minutes and 24 hours before applying the first layer of microcement.
4
At low temperatures and high humidity, the primer drying process may take longer. It is advisable to apply the primer with an ambient temperature between 10 and 30ºC.